DRY MIXER - SEJITECH

Non Gravity Mixer – Sejitech

The two axes of mixing interior rotates to different sides and paddles attached to the axes forms fluidized area by diffusing mixed materials to different directions according to stable apex speed.

At this time, the movement of materials is concentrated on the higher center part from the bottom of mixer, and therefore, the effective volume of mixing room increases, and as the effective volume increases, the collision and rubbing between materials decrease.

Below are the characteristics of Non-gravity mixer:

The fluidized Zone Mixing

It proceeds rapid mixing in a Non-gravity condition regardless of diameter of materials, specific gravity, and shape

Homogeneous Mixing

By diffusing and moving materials in actiniform by the dynamic structure of paddle, it mixes small adding agent even in mass ratio of 1:100,000

Gentle Mixing

As the speed of rotation axis is slow, the impact or shearing force on material is not caused. So it can proceed mixing without damaged materials.

Short Mixing Time

In case of powder mixing, the time that takes to mix is so short, and it takes less than 1 minute and only in a few seconds

Economical Mixing

As it proceeds mixing in a short time, it reduces operation cost and maximize productivity at the same time, and also mass production with small-scale equipment. Therefore, initial installation charge and driving cost are low.

ADVANTAGES

Advantages of non-gravity mixer is short mixing period.

APPLICATION

Continous Mixer – Sejitech

Shape that makes the most advantage out of batch-type non-gravity mixer.
Form with attached non-gravity mixer.
Mixing and conveying of raw materials are performed simultaneously by rotation of paddles.
Inputs and discharges of raw materials are simultaneously processed, enhancing production per unit time.

FEATURES

It is easy to mix raw materials even with large difference in particle size and proportion.
It is possible to mix fragile raw materials.
Takes up less space than other continuous mixers.
Easy to continuously produce single type of product.
Facility is simplified, no need for complex facilities.
Advantageous not only for mass production but also for small production sites.

APPLICATION

Field	Contents
Food industry	Coffee, frozen vegetables, seasoning, ramen seasoning, cereal, sugar, salt, etc.
Chemical industry	Carbon products, detergents, fragrance, PC, etc.
Ceramic	Refractory, flame retardant, clay / sand
Dry Mortar	Cement, building materials, fly ash
Pharmaceutical Industry	Animal medicine, pesticide
Other fields	Liquid coating field

Shovel Mixer – Sejitech

Consisted of horizontal main body, one shaft and shovel type wing, driving device, high speed chopper, etc.
The plow-shaped wing forms a fluidized layerdue to the constant rotational speed, and moves the mixture in horizontal direction to mix the raw materials.
When small amount of additive or liquid are added. high-speed chopper can be used to produce dispersion effect and milling effect.
After completely mixing the raw materials, the discharge starts from the outlet of the central part and the outer wing pushes the raw materials inward, and it is possible to discharge the mixture when there is no outlet.

FEATURES

It is very suitable for mixing raw materials with big difference in particle size and proportions. Advantageous for quick mixing.
When mixing Powder + Powder form,small amount of additive has a very good effect on mixing results.
When using high speed chopper, there is almost no deposit of raw materials.
Raw materials are massaged while mixing. Accordingly, those raw materials that require both mixing and reacting are very suitable.
It is excellent in crushing and mixing with high speed chopper, especially flour, starch, rice flour + shortening.

APPLICATION

Abrasives such as chemical products, food, medicine, pesticide, feed, plastics, brake lining
Powder + liquid, powder + small amount of additives, and complex processing
Especially effective for mixing sticky and deadlocked additives.